WARM AUDIO WA-MPH Mutation Phasor II

Key Features

• Maximum Depth – For ultra-rich swirly phase-shifting, the “Depth” control allows you to vary the width of the sweep range – delivering deep modulation expected from a vintage, all-analogue pedal. Increasing the depth control adds width to the frequency range of the effect, impacting higher highs and lower lows.
• Rate Switch – Easily change the speed (or rate) of the phase-shifting effect to create more or less “wobble” in your tone – From 1/10th sweeps per second (slowest) to 18 sweeps per second (fastest).
• Feedback – Increasing the “Feedback” control adds electric feedback to the “wet” phase-shifting signal. Increasing the feedback control creates a more intense phase sound with a particular emphasis on the sweeps – Especially noticeable at slower rate settings.
• Lush Studio Sound, Road-Worthy Build – A true-to-original recreation of the 70s circuit, Mutation Phasor II is built with premium components including classic RC4558P op-amps, vintage-style diodes, carbon resistors, and film caps – Housed in an ultra-tough, vintage-vibe steel case.
• Hand-Tested in Austin, Texas – Like all Warm Audio gear, the Mutation Phasor II is meticulously hand-tested and inspected by trained technicians with a passion for making music in Austin, Texas USA.

Specifications

• Controls: Rate, Depth & Feedback
• Frequency Response: 20Hz – 20KHz
• Min Feedback: 4V RMS, 11.2V Peak-to-Peak | Max Feedback: 2V RMS, 5.6V Peak-to-Peak
• Signal-to-Noise Ratio: 86 dB Below 2V Input
• Current Draw: 150 mA
• Bypass: Buffered
• Power: 9-Volt Battery Or External Centre-Negative 9V Regulated DC Adapter (Not included)
• Dimensions: 2” x 3.5” x 6.5”