หมวดหมู่สินค้า
ตะกร้าสินค้า

Yamaha HS8 ( Single )

Yamaha HS8 ( Single )
Yamaha HS8 ( Single )
Yamaha HS8 ( Single )
Yamaha HS8 ( Single )
-26 %
Yamaha HS8 ( Single )
Yamaha HS8 ( Single )
Yamaha HS8 ( Single )
Yamaha HS8 ( Single )
13,600.00฿
18,400.00฿
  • Stock: In Stock
    ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
    *กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 0811-444-729
  • Model: Yamaha HS8 ( Single )
Yamaha HS8 ( Single )

Yamaha HS8 8″ Powered Studio Monitor 120W

The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction. It is capable of up to 120W of total output and features an 8-inch woofer and a 1-inch tweeter with waveguide that can produce frequencies up to 30kHz. The HS8 has both an XLR and 1/4″ TRS input that accept either balanced or unbalanced signals for integration into a variety of studio setups.

Low Resonance Enclosure Design
HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound
Noise Reduction Technology
Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of a visual representation of the sound, Yamaha’s engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB
Controls and Connectivity
HS Series full-range models feature two response controls with settings that allow them to adapt to the surface acoustics of rooms of varying shape and size. ROOM CONTROL allows you to attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed next to walls, while HIGH TRIM allows for more flexible control of high frequency response. For inputs, HS full-range speakers can accommodate a range of balanced and unbalanced sources such as mixers, keyboards and audio interfaces with XLR and TRS phone jacks

Features

  • High-performance drivers and mounting system
  • 8″ cone woofer, 1″ dome tweeter
  • Impressive 38Hz to 30kHz frequency response
  • Large magnets in an Advanced Magnetic Circuit design
  • Built-in bi-amplification: 75-watt LF, 45-watt HF
  • Dedicated power amps are perfectly matched to the woofer and tweeter
  • Enclosure is designed to kill unwanted resonances that can influence sound
  • Room control and high-trim response controls give you optimum response in any room

Specs

System Type2-Way Bi-Amped Powered Studio Monitor
Frequency Response38 Hz to 30 kHz
Crossover Frequency2 kHz
TransducerLF: 8″ (127 mm) Cone
HF: 1″ (25 mm) Dome
Output PowerTotal: 120W
LF: 75W
HF: 45W
Input Sensitivity-10 dBu / 10 kΩ
Inputs1x Balanced XLR3-31 Type
1x 1/4″ (6.35 mm) Balanced TRS
ControlsLevel Control (+4 dB/Center Click)
EQ: High Trim Switch (+/- 2 dB @ HF)
Room Control Switch(0, -2, -4 dB under 500 Hz)
Indicators1x Power On White LED
Power Consumption60 W
EnclosureType: Bass-Reflex
Material: MDF
Dimensions (WxHxD)9.8 x 15.4 x 13.1″ (250 x 390 x 334 mm)
Weight22.5 lb (10.2 kg)

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
ไม่ชอบ ชอบ
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.