The cabinet also provides M6 fixings for use with CB-10 wall brackets, WB-10 ceiling brackets, and OmniMount brackets (all sold separately). A 3/8” threaded insert is provided behind an EPDM rubber cover on the bottom of the cabinet for use with microphone stands as a spot monitor.
Turbosound IMPACT 65TWH
| Components | 2 x 5″ (12.7 cm) LF drivers, 2 x 1″ (2.5 cm) ferro fluid-cooled neodymium HF tweeters |
| Frequency Response | 74 Hz to 18 kHz / ±3 dB 43 Hz to 20 kHz / ±10 dB |
| Nominal Dispersion | 100 (H) x 70° (V) @ -6 dB points |
| Power Handling | 120 W continuous, 240 W program |
| Sensitivity | 90 dB SPL, 1 W @ 1 m |
| Maximum SPL | 111 dB continuous, 117 dB peak |
| Impedance | 8 ohms |
| Transformer Taps | Transformer taps at 60/30/15 W (100 V line); 60/30/15/7.5 W (70 V line), and low-impedance setting |
| Crossover | Internal passive crossover at 4.5 kHz, 12 dB/octave |
| Construction | Gas-injected, glass-filled molded ABS enclosure |
| Grille | Powder-coated galvanized perforated steel |
| Connectors | Color-coded binding posts |
| Standards | Fire retardant to V0 ABS |
| Mounting | 2 x M6 fixing points for included WB-5 wall bracket |
| Dimensions (H x W x D) | 17.7 x 6.5 x 6.2″ (45.0 x 16.5 x 15.7 cm) |
| Weight | 11 lb (5 kg) |
