Jim Dunlop MXR M288 Bass Octave Deluxe

The Bass Octave Deluxe offers two independent analog sub-octave voices with a Dry control and a Mid+ switch to optimize the sound of your parallel clean signal.

THE LONG STORY.

The Bass Octave Deluxe is a dual-voice octave pedal that offers analog tone, true bypass, and a variety of tonal options. MXR's 18 volt Constant Headroom Technology™ provides high headroom and superior tracking. Use the Dry knob to mix in your direct signal, and hit the Mid+ switch to add up to +14dB of internally adjustable mid frequencies (400Hz or 850Hz). Finally, mix in two separately controlled octave voices-Growl (for throaty tone) and Girth (for deep tone).

POWER

The MXR Bass Octave Deluxe is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC Adapter such as the Dunlop ECB003/ECB003EU, or a DC Brick™ power supply

SPECIFICATIONS

• Input Impedance:  1 MΩ
• Output Impedance:  < 600 Ω
• Noise Floor*: 85 dB
• Octave Bandpass:  -3 dB, 8 Hz to 46 Hz

Control Range

• Dry -∞ to +2.5 dB
• Girth -∞ to +1 dB
• Growl -∞ to +6 dB

MID+ Switch**

• Gain:  +4 dB to +14 dB
• Frequency:  400 Hz or 850 Hz
• Bypass:  True Hardwire
• Current Draw:  14 mA
• Power Supply:  9 volts DC