Marshall ORIGIN 20C

The Marshall Amplification Origin 20 is a 20W combo amplifier intended for use with electric guitars. It utilizes a tube-powered design, with Three ECC83 preamp tubes and two EL84 tubes for the power amp. With a 10″ Celestion V-type speaker, the amp gives you a tone that screams Marshall. This is a one channel amplifier with controls for bass, middle, treble, and volume.

Additionally, you’ll find a Tilt tone control, a filter independent from the main equalizer circuit. The Tilt knob changes the voice of the amp from a modern tone to a more vintage timbre.

Furthermore, the volume knob plays host to a pull-boost feature which adds some extra gain into the signal, giving you the pleasant breakup of tube-based distortion. With the included footswitch, you can control the pull-boost with a tap of your toe.

Turn your attention to the rear of the amplifier, and you’ll note three 1/4″ speaker outputs for routing to 16- and 8-Ohm cabinets. In addition to the 1/4″ footswitch input and 1/4″ DI output, you’ll see 1/4″ jacks for an external effects loop. This is useful for patching your outboard gear and pedals directly into the Origin 5’s signal path. 

Features:

• 20W Operation, 1×10″ Celestion Speaker
• 1 Channel with Multiple Voicings
• Volume, Bass, Mid, Treble & Tilt Knobs
• Pull Boost on Volume Knob for Extra Gain
• Built-In Effects Loop
• 1/4″ DI Output with Emulated Loudspeaker
• Multiple 1/4″ Speaker Outputs
• Power-Reduction Switch, Included Footswitch