- Stock: In Stock
ตรวจสอบก่อน! ว่ามีสินค้าหรือไม่
*กรุณาโทรเช็คสต็อคสินค้าก่อนสั่ง 0811-444-729 - Model: แอมป์กีตาร์ Line 6 PowerCab 112 Plus
A great match for any amp modeler
The Line 6 PowerCab 112 Plus was built with amp modelers in mind. It can supply both a traditional guitar cabinet tone or a flat response. In Flat mode, the PowerCab 112 Plus delivers a full-range frequency response from 70Hz to 20kHz with a healthy amount of headroom. With this setting, there are no surprises — what goes in is what comes out. Your presets will sound exactly like they’re supposed to. Beyond that, you also get six realistic guitar speaker models. These simulations not only produce the sound of a traditional guitar cab, but also the feel. No matter what you’re playing — rock, country, blues, jazz, metal — the PowerCab 112 Plus is a great match for any amp modeler.
Accommodates third-party impulse responses
While the PowerCab 112 Plus includes plenty of top-shelf speaker models, there are a lot of great-sounding third-party options out there. Don’t sweat it — with 128 user-loadable slots for impulse response processing, the PowerCab 112 gives you all the flexibility you’ll need to achieve the sound you’re aiming for. All presets are recallable, MIDI- and L6 LINK-controllable, and can be configured as any mode (Flat, Speaker Modeling, or IR). A backlit LCD display and illuminated knob make for easy editing, and there’s a built-in USB jack if you need to dig deeper with your Mac or PC.
A worthy stage companion
Even though the Line 6 PowerCab 112 Plus weighs a mere 36 pounds, it still makes a worthy stage companion. It’s loaded with a custom coaxial 12″ guitar speaker and a 1″ compression driver, and its 250-watt amplifier delivers an impressive 125dB peak SPL. And for even more flexibility, its microphone-emulated XLR output allows for direct connection to a PA system. On top of that, foldout kickstands allow you to use the PowerCab 112 Plus for angled backline placement or as an angled floor monitor.
Specs
- Configuration:1 x 12″
- Powered:Yes
- Speakers:12″ Custom-designed Coaxial Speaker, 1″ HF Compression Driver
- Total Power:250W
- Cabinet Type:Slant, Tilt back
- Open/Closed Back:Closed
- Inputs:2 x XLR-1/4″ combo (line in), 1 x XLR (L6 Link/AES)
- Outputs:1 x XLR (emulated direct out), 1 x XLR (L6 Link/AES)
- Other I/O:MIDI In, Out/Thru, 1 x USB Type B (stereo)
- Maximum Peak SPL:125 dB SPL
- Frequency Range:70Hz-20kHz
- Height:18.18
- Width:22.32″
- Depth:12″
- Weight:35 lbs. 8 oz.
- Manufacturer Part Number:99-010-7105