NUX B-7 Pro Wireless In-Ear Monitor System

Specifications

– Operating Frequency Band: 2400-2483.5MHz

– Transmit Mode: Frequency Hopping

– RF Output Power: 10mW E.l.R.P. max

– Audio Quality: 24bit/48kHz

– Frequency Response: 20Hz-20kHz

– Latency: 7.33ms(low latency setting)-10.85ms(default)-14.33ms(safe setting)

– Unbalanced Input lmpedance: 10kΩ

– Balanced Input lmpedance: 20kΩ

– AUX Input Level: 2.1 Vrms(8.7dBu) max

– Balanced Input Level: 9.8 Vrms(22dBu)max

– Headphone output Impedance: Minimum 13Ω

– Headphone Maximum output power per channel: 57mW (THD<0.1% RLOAD=16Ω,1kHz)

– Channel separation: -105dB

– THD+N: <0.01% typical

– Dynamic Range: 110dB A-weighted

– Output level Adjustment Range: Mute -86dB~+12dB

– Auto-0ff: It automatically turns off after 10 minutes of no connection or if the connection is lost

– Built-in Battery Capacity: Rechargeable Li-polymer (Transmitter 3.7V/3000mAh, receiver 3.7V/400mAh)

– Battery Lifetime: TX: Up to 6 hours/ RX: Up to 6 hours

– Power Requirements: DC 9V, 1A min, negative tip power supplies(Transmitter)

– Operation Range: Up to 50m (165 feet) maximum

– TX Dimesions: 140mm*97mm*53mm (L*W*H)

– TX Weight: 525g

– RX Dimensions: 47*71*22mm (L*W*H)

– RX Weight: 51g