Jim Dunlop Cry baby BD 95 Billy Duffy Wah

Features

Two different wah circuits selectable via kickswitch

Vintage mode uses custom inductor designed just for Billy Duffy

Auto-return switching

Run an instrument cable from your guitar to the BD95’s INSTRUMENT jack and another instrument cable from the BD95’s AMPLIFIER jack to your amplifier’s input.

To engage the effect, simply push the toe of the pedal down with your foot. To disengage, remove your foot from the pedal.

Use MODE kickswitch to toggle between 95Q mode, indicated by blue LEDs on either side of pedal, and Vintage mode, indicated by red LEDs.

Rotate internal AUTO-RETURN DELAY control clockwise to increase length of effect ring out or counterclockwise to decrease it.

Rotate the VOLUME control clockwise to increase volume of effect in 95Q mode or counterclockwise to decrease it. Note: This control is inactive in Vintage mode.

Rotate the Q control clockwise to narrow 95Q mode’s bandpass and emphasize higher end harmonics or counterclockwise for a wider bandpass that emphasizes lower end harmonics. Note: This control is inactive in Vintage mode.

Rotate internal BLUE trimpot clockwise for a brighter toe-down response or counterclockwise for a warmer toe-down response. Note: This control is inactive in Vintage mode.

Rotate internal RED trimpot clockwise for a brighter toe-down response or counterclockwise for a warmer toe-down response. Note: This control is inactive in 95Q mode.

Rock your foot back and forth on the pedal to hear the vocal, expressive tones that the Cry Baby Wah is famous for.