EBS MICROBASS 3 เอฟเฟคเบส

Built on famous EBS amplifier designs

The EBS MicroBass 3 is a 2-channel preamp, built exclusively with premium components. It is engineered by EBS in Sweden with technologies from the famous HD360 and Fafner II amplifier designs.

Professional grade signal level

The preamp operates at a signal level equal to a professional mixing console (+/- 15V) which gives you plenty of headroom. The high signal level makes it suitable to use as a preamp in combination with any type of power amp.

Clean and Drive in series or parallel

Run the Clean and Drive channels in series or parallel. Use the dual balanced XLR-outputs to tap the signal post and pre EQ at the same time. If you run the Effects loop in stereo mode, the balanced outputs become a Left and Right output instead.

Handles any type of bass

With 10 Mohms input impedance, it handles any type of bass – passive, active or with piezo pickups.

Onboard Tuner & Compressor

The built-in tuner makes it easy to tune between songs without the need of an external device. The MicroBass 3 also carries an onboard compressor, similar to the one found on several EBS amplifiers.

The analog EBS MicroBass 3 ensures your sound – every time.

Clean Channel:     

• Input Impedance  
  • Parallel mode  1.5 Mohms // 44 pF
  • Serial mode  10 Mohms // 22 pF
• Gain:
  • Gain Range min/max -oo/ +30 dB
  • Gain Peak LED +10 dBv
  • Frequency Response  +0 / -3 dB  20 - 20.000 Hz
• CHARACTER:
  • Filter Type  Shelving High/Low Pass
  • Gain:  Lo  +6 dB @ 80 Hz
    Mid  -2 dB @ 900 Hz
    Hi  +3 dB @ 7.5 kHz
• BRIGHT:
  • Filter Type  Shelving.  Gain:  +10 dB @ 10 kHz
• FILTER SECTION: 
  • Bass Filter:  Type   12 dB/oct. Shelving. Gain Range  +/- 18 dB @ 60 Hz
  • Middle Filter: Type  Bandpass Filter. Freq Range  50 - 5.000 Hz. Q - Boost  0.5 - 1.3,  Q - Cut  0.5 - >5.  Gain Range +/- 12-15 dB
• Treble Filter: Type  Shelving. Gain Range +/- 18 dB @ 8 kHz
• COMP/LIMIT: Comp Gain  0 dB
  • Attenuation max  24 dB
  • Compression Ratio max  3:1
  • Attack (80%) typ  <10 ms
  • Release (80%) typ  100 ms

Drive Channel:

• INPUT: Input Impedance   1.8 Mohms // 22 pF
• DRIVE: Gain Range  40 dB
• ENGINES:
  • Lo: Type   2nd harmonics soft
  • Hi: Type   Symmetrical 2-stage with +18 dB gain
• TYPE:  Thin/Normal/Deep   Pre Drive EQ
• FILTER SECTION: 
  • Tone Filter:   Type  6 dB/oct.   Low Pass. Frequency Range  700 - 20k Hz
  • Middle Filter:   Type   Bandpass Filter. Frequency Range 100 - 4.500 Hz. Q  1.2,   Gain Range  +/- 15 dB

EFFECTS LOOP:

• Loop Signal Level nominal  -10 dBv
• Gain  Unity (1:1)
• Output Impedance  <100 ohms
• Input Impedance  >200 kohms // 22 pF

PHONES OUT:   

• Recommended Impedance  32 - 200 ohms

AUX INPUT:  

• Input Impedance  20 kohms
• Nominal Level  -10 dBv

OUTPUT: 

• Output Impedance  <1 kohms
• Signal Level  nominal  0 dBv

BALANCED OUTPUTS:

• Output Level  nominal  -20dBv
• XLR Connections  1-GND, 2-Hot, 3-Cold
• Options  Pre/Post EQ, L/R Ch. in stereo mode

AUXILIARY INFO:   

• Power Requirements   Idle  450mA @9V. Max  750mA @9V (with headphones at max output level)

Dimensions (WxDxH):   max  168 x 124 x 53 mm / 6.6” x 4.9” x 2.1”

Weight:  660 g ( 1.5 lbs.)